1.重量轻；铝的密度为2.73g/m3,只有钢的1/3。
1. light weight; aluminum density is 2.73g/m3, only steel 1/3.
2.强度高；通过成份配置、加工和热处理方法可以达到很高的强度。
2., high strength; high strength can be achieved through component configuration, processing and heat treatment.
3.耐腐蚀；具有自我防锈能力，形成的氧化层，可防止金属氧化锈蚀，耐酸碱性好。
3., corrosion resistance. The oxide layer with self rust resistance can prevent oxidation and rust of metals, and is good for acid and alkali resistance.
4.安装方便；铝金属可以铆接、焊接、胶粘等多种方式连接。
4., installation is convenient; aluminum metal can be riveted, welded, glued and other ways.
5.环保，可循环回收利用。
5. environmental protection, recyclable recycling.

铝镁锰板的种类：A、原色锤纹 Stucco（无规则压纹）、Emboss（规则压纹）
The types of aluminum, magnesium and manganese plates are A, primary color hammer, Stucco (irregular grain), Emboss (regular embossing).
锤纹的主要目的： 1、增加铝镁锰板刚度；
The main purpose of hammer stripe is as follows: 1, increase the stiffness of Al Mg Mn board.
2、防止光污染；
2, to prevent light pollution;
3、更加均匀的氧化。
3, more uniform oxidation.
B、烤漆涂层 （PVDF、PVF2、PE）；屋面及外墙用铝镁锰合金一般采用预滚涂（Coil Coated）工艺，具有色差控制好、漆膜均匀、质量稳定性高、环保等点。涂层种类一般选用含氟碳树脂70%以上的PVDF氟碳漆。
B, lacquer coating (PVDF, PVF2, PE); aluminum and magnesium manganese alloy in roof and exterior wall generally use Coil Coated technology, with good color difference control, uniform paint film, high quality stability, environmental protection and so on. The type of coating is generally PVDF fluorocarbon paint containing fluorocarbon resin more than 70%.
通过本文的介绍，相信大家对于铝板生产厂家//www.renttoplux.com有了一定的了解，如果想了解其他相关的知识，请跟我们联系！
Through the introduction of this article, I believe that you have a certain understanding of the aluminum manufacturer //www.renttoplux.com, if you want to know the other relevant knowledge, please contact us!