铝板压型加工时是铝卷在压型设备（彩钢瓦设备）上面加工，类似于滚边、折边加工工艺，将铝板加工为各种型号的188金宝搏中国官网苹果 ，主要用于屋面、电厂脱硫、防腐保温等行业中。
Aluminum sheet is processed by aluminum roll in pressure type equipment (color steel tile equipment). It is similar to edge rolling and folding processing technology. Aluminum plate is processed into various types of pressure aluminum plate. It is mainly used in roofing, power plant desulfurization, anticorrosion and heat preservation and other industries.
铝板压型加工的常见规格：通常铝板都是压型YX35-125-750型号较为常用，尤其是电厂防腐保温工程、烟道脱硫防腐工程较为常用，厚度以0.5-1.2mm厚度居多，材质常常为1060、3003、3A21、LF21等材质。上海吕盟铝业有限公司常年提供优质188金宝搏中国官网苹果 ，瓦楞铝板，铝瓦等产品，欢迎来电咨询。
The common specifications of aluminum sheet pressing processing: usually the aluminum plate is the most commonly used type YX35-125-750 type, especially in the power plant anticorrosion and insulation engineering, flue gas desulfurization and anticorrosion engineering is the most commonly used, the thickness is more than 0.5-1.2mm thickness, material is often 1060, 3003, 3A21, LF21 and other materials. Shanghai Lun Meng aluminum products Co., Ltd. provides high-quality aluminum sheet, corrugated aluminum plate, aluminum tile and other products all the year round. Welcome to inquire.
第二种常见的铝板压型加工型号为YX23-210-840型号，常常拥有屋面和墙面方面，我们称为840型188金宝搏中国官网苹果 ，有时候许多工厂和车间的屋面采用彩涂铝卷进行压型常常选择840型号的188金宝搏中国官网苹果 。

Second kinds of common aluminum plate compression processing model for YX23-210-840 model, often have roof and wall aspects, we call the type 840 type of pressure aluminum plate, sometimes many factories and workshop roofs with color coated aluminum rolls for pressure type often select the 840 type of pressure aluminum plate.
铝板在压型加工过程中要注意188金宝搏中国官网苹果 的长度和厚度，避免因为设备问题导致的188金宝搏中国官网苹果 边缘部位因为磨损导致的毛刺。在铝板的压型加工以后包装的适合也要注意防水防潮。同时在选择铝板材质方面建议不要选择硬度太高的产品，通常可选择H24或者H16状态的铝卷作为铝板压型加工的原料，如果铝板硬度太高会导致加工过程中断裂问题。
In the process of pressing, the length and thickness of the aluminum plate should be paid attention to in the process of pressing the aluminum plate, so as to avoid the burr caused by wear because of the equipment problem. When the aluminum sheet is pressed, the packing is also suitable for waterproofing and moisture proofing. At the same time, it is recommended not to choose the products with too high hardness in the material of aluminum plate. The aluminum rolls of H24 or H16 can be selected as raw materials for aluminum sheet pressing. If the hardness of the aluminum plate is too high, it will cause the fracture problem during the process.
压型加工中常见问题：压型加工中的问题主要是铝卷平整度不行，容易跑偏，所以想要压型过程中不跑偏建议采用拉弯矫处理，校平平整度，就能够很好的避免铝板压型过程中的跑偏。上海吕盟铝业有限公司常年提供各种优质的188金宝搏中国官网苹果 ，适合于电力、屋面、设备罐体等各种设备使用，现货供应厚度0.5毫米、0.6毫米、0.7毫米、0.8毫米、1毫米等各种厚度的188金宝搏中国官网苹果 和保温铝皮，彩涂氟碳和聚酯188金宝搏中国官网苹果 等各种产品。
The common problem in press machining: the main problem in the compression machining is that the flatness of the aluminum coil is not good and easy to run off, so it is suggested to use the tension bending correction and the leveling to avoid the deviation in the process of the aluminum plate pressing. Shanghai Lumeng Aluminum Co., Ltd. provides all kinds of high quality aluminum plate for all kinds of equipment. It is suitable for all kinds of equipment, such as electric power, roofing, equipment tank and so on. The spot supply is 0.5 millimeter, 0.6 millimeter, 0.7 millimeter, 0.8 millimeter, 1 millimeter and other thickness of pressure type aluminum plate and insulating aluminum skin, color coating fluorocarbon and polyester press aluminum plate and so on Products.