铝板在生产过程中是平整为片状进行售卖的，但有些建筑企业在使用铝板时会选择把铝板折弯，折弯后便于施工使用，一般来说薄一点的铝板折弯是没有问题的，但厚一点的就需要使用一些工具进行处理。处理过程相对来说也比较简单，那么有朋友可能会产生疑问，什么类型的铝板可以折弯，折弯的铝板是否硬度不够?对于这些问题，铝板批发厂家做出如下解答。
In the production process, aluminum plates are flat and sold in flakes, but some construction enterprises will choose to bend aluminum plates when using aluminum plates. After bending, it is convenient for construction and use. Generally speaking, there is no problem in bending thin aluminum plates, but some professional tools are needed for thicker ones. The processing process is relatively simple, so a friend may have questions, what type of aluminum plate can be bent, whether the bending aluminum plate hardness is not enough? For these questions, the aluminum plate wholesale manufacturers make the following answers.
铝板批发厂家提到在正常情况下，o状态的铝板折弯一般没有问题，但由于该状态的铝板过于柔软，所以很少用该状态的铝板折弯。 同时，选铝板时要注意纯铝板和合金铝板的区别。 一般来说纯铝的硬度不怎么高。 具体而言，纯铝的弯折使用1100、1050、1060等，建议用1100H26的。
Aluminum plate wholesalers mentioned that under normal conditions, there is no problem with aluminum plate bending in o state, but aluminum plate in this state is rarely used for bending because the aluminum plate in this state is too soft. At the same time, attention should be paid to the difference between pure aluminum plate and alloy aluminum plate when selecting aluminum plate. Generally speaking, the hardness of pure aluminum is not very high. Specifically, 1100, 1050 and 1060 are used for pure aluminum bending, and 1100h26 is recommended.

一些合金铝板硬度相对来说会比较好一点，一般可以使用3003、3005、5052等半硬状态的铝板进行弯折。 6061、2024、7075的硬度过高，特别是T6的状态应该不会弯曲。 只要不加温弯曲，好铝板和坏铝板的区别在于氧化性能、公差、表面效果、结晶精度及均匀稳定性等，它们弯折的程度一般是不一样的，效果也不是很明显。
The hardness of some alloy aluminum plates is relatively better. Generally, 3003, 3005, 5052 and other semi-hard aluminum plates can be used for bending. The hardness of 6061, 2024 and 7075 is too high, especially for T6. As long as the bending is not heated, the difference between good aluminum plate and bad aluminum plate lies in oxidation performance, tolerance, surface effect, crystallization accuracy and uniform stability. The bending degree of them is generally different, and the effect is not very obvious.
对于可以折弯的铝板还分为不同的厚度，厚度不同折弯的能力也不同，一般来说，薄一点的铝板折弯是没有问题的，但相对来说厚度大一点的，用手掰比较困难的可以选择一些钳子进行辅助掰弯，在厚一点的就需要一些大型工具进行加工处理了。
The aluminum plates that can be bent are also divided into different thicknesses, and the bending ability is different with different thicknesses. Generally speaking, there is no problem for the aluminum plates with thinner thickness, but for those with larger thickness and more difficult to break by hand, some pliers can be selected for auxiliary bending, and some large tools are needed for processing the thicker ones.
以上就是铝板生产厂家介绍的铝板可以折弯的类型，不同厚度，不同硬度的铝板在折弯时需要操作的步骤也不同，因此要根据铝板具体的情况进行处理。综合考量，在采取措施，这样在使用工程中也会比较顺利。
The above is the type of aluminum plate that can be bent as described by the aluminum plate manufacturer. Different thickness and hardness of aluminum plate require different operation steps during bending, so it should be handled according to the specific situation of aluminum plate. Comprehensive consideration, in the adoption of measures, this will be more smooth in the use of the project.