我们先从2系列谈起，该系列合金铝板内部铜含量高，可热处理，属于硬铝合金。通常在各种模具和机械行业使用。3系列是铝锰合金，属于价格比较便宜的合金，尤其是3003合金铝板属于合金铝板里面价格比较低的产品，内部合金含量锰合金比价高，而5系铝板也属于防锈铝，但是价格要比3系高，该系列的合金硬度更高，防锈性能更好。六系合金属于铝镁硅合金，内部含有一定的镁合金和硅合金，焊接性能不错，在钎焊方面有较大的应用，特别指出的是该系列合金可淬火加工为T6状态，切削铣磨加工不错。
Let's start with series 2. This series of alloy aluminum plate has high copper content and can be heat treated. It belongs to hard aluminum alloy. It is usually used in various mold and machinery industries. Series 3 is aluminum manganese alloy, which is relatively cheap. In particular, 3003 alloy aluminum plate is a product with relatively low price in alloy aluminum plate, and the internal alloy content is higher than that of manganese alloy. While Series 5 aluminum plate is also antirust aluminum, but the price is higher than that of series 3. This series has higher alloy hardness and better antirust performance. The six series alloy is an aluminum magnesium silicon alloy, which contains a certain amount of magnesium alloy and silicon alloy. It has good welding performance and has great application in brazing. In particular, it is pointed out that this series of alloys can be quenched to T6 state and good cutting and milling processing.

铝板是以A00铝锭为质料生产的产品,在消融铝锭的时分在内部加入各种合金锭,从而得到合金铝板.消融铝锭的时分各种合金含量的份额关于合金铝板的质量影响重大,下面我们就看一下合金铝板厂家关于合金铝板合金含量的控制.
Aluminum plate is a product made of A00 aluminum ingot. When melting aluminum ingot, various alloy ingots are added inside to obtain alloy aluminum plate. The share of various alloy content at the time of melting aluminum ingot has a significant impact on the quality of alloy aluminum plate. Let's take a look at the control of alloy content of alloy aluminum plate by alloy aluminum plate manufacturers
合金铝板厂家对合金含量的投入必 须需按照标准里边规则的来进行添加.需求注意的合金含量并不一定多多益善,所以在添加过程中不能超过规则的合金含量上限,假如超过了上限就属于不合格产品了.假如不小心添加的数量多了则还需求投入铝锭进行稀释,假如投入的份额少了则投入相应的合金锭来进步合金含量.合金铝板正是由于含有了各种不同份额的合金从而拥有了不同的力学性能和化学特性.
Alloy aluminum plate manufacturers must add the alloy content according to the rules in the standard. The alloy content that needs to be paid attention to is not necessarily the more the better, so the upper limit of the regular alloy content cannot be exceeded in the addition process. If the upper limit is exceeded, it will belong to unqualified products. If the quantity added accidentally is more, it is also necessary to input aluminum ingots for dilution, If the input share is less, the corresponding alloy ingots are input to improve the alloy content. The alloy aluminum plate has different mechanical and chemical properties because it contains various alloys with different shares