来源://www.renttoplux.com/发布时间:2022-03-08
1.易实现自动化生产。由于铝型材的电泳涂装在水性电泳槽中进行,与阳极氧化、电解着色工艺类似,处理时间短,容易实现整个工艺的流水线作业。
1. Easy to realize automatic production. Because the electrophoretic coating of aluminum profile is carried out in the aqueous electrophoretic tank, which is similar to the anodic oxidation and electrolytic coloring process, the processing time is short, and it is easy to realize the assembly line operation of the whole process.
2.涂膜均匀致密。由于铝型材的电泳涂料的高泳透力,可使复杂形状的型材亦获得均匀的涂膜,同时通过调整电量可控制膜厚。
2. The coating is uniform and dense. Due to the high penetration of the electrophoretic coating of aluminum profile, the profile with complex shape can also obtain a uniform film, and the film thickness can be controlled by adjusting the electric quantity.
3.涂料的利用率高。由于粘度低,工件带出较少,而且电泳工件可用水洗,回收装置的利用使电泳涂装的涂料利用率高达95%以上。
3. High utilization rate of coating. Due to the low viscosity, less workpieces are brought out, and the electrophoretic workpieces can be washed with water. The utilization of the recovery device makes the coating utilization rate of electrophoretic coating up to more than 95%.
4.安全性和环保性。由于电泳涂料的水稀释,固体份低,溶剂含量少是环保型涂料,且免除了火灾的危险,工人健康也有保障。
4. Safety and environmental protection. Due to the water dilution, low solid content and low solvent content of electrophoretic coating, it is an environmental friendly coating, which eliminates the risk of fire and ensures the health of workers.
5.涂膜质量好。丙烯酸树脂用氨基树脂固化,保证了涂膜的高装饰及高耐腐蚀性,同时由于树脂高度透明,有效地突出了铝型材的金属质感,根据需要还可得到亚光、沙面、珠光等装饰效果。
5. Good coating quality. Acrylic resin is cured with amino resin, which ensures the high decoration and high corrosion resistance of the film. At the same time, due to the high transparency of the resin, it effectively highlights the metal texture of aluminum profile, and can also get Matt, sand surface, pearlescent and other decorative effects as needed.
6.和通常的电解着色封孔工艺相比,具有省时,节省人力的特点,电泳涂膜无需封孔,避免了由于封孔不好带来的裂纹等毛病。
6. Compared with the usual electrolytic coloring sealing process, it has the characteristics of saving time and manpower. The electrophoretic coating does not need to seal the hole, avoiding the defects such as cracks caused by poor sealing.
7.可自由控制涂膜的厚度,国内外通常控制7μm和12μm两档。
7. The thickness of the coating film can be controlled freely, which is usually controlled at home and abroad μ M and 12 μ M two gears.
8.由于电泳层透明光亮,因此要求铝铸锭质量高,挤压材表面平滑,机械缺陷少,对氧化着色工艺要求管理严格,因为任何微小的缺陷和沾污都会在透明漆下暴露无遗。
8. As the electrophoresis layer is transparent and bright, it is required to have high quality of aluminum ingot, smooth surface of extruded material and few mechanical defects. It is required to strictly manage the oxidation coloring process, because any small defects and contamination will be exposed under the transparent paint.
9.对电泳工艺管理要求高,以提高铝型材的成品率。
9. High requirements for electrophoresis process management to improve the yield of aluminum profiles.