来源://www.renttoplux.com/发布时间:2022-03-31
铝板在应用全过程中,在所难免碰到很多问题,一些问题则是因为在中后期应用全过程实际操作不善造成的。因而,铝板生产厂家下面来讲讲铝板油脂处理事项。
Aluminum plate in the whole process of application, it is inevitable to encounter a lot of problems, some problems are caused by poor practical operation in the whole process of application in the middle and late period. Therefore, aluminum plate manufacturers will talk about the following aluminum plate grease treatment matters.
油渍并并不是指铝板出产进行后沾带的,只是在开展铝板的冷轧后,铝板生产厂家在铝梢外表带了过多的油,而且还附加了除轧制油膜之外的剩下油脂,在中后期对产品开展查询和分割出产时,便会在外表发觉这种人眼由此可见的油脂。
Oil stains and does not mean that after stained with aluminum plate production, just after cold rolling of aluminum plate, aluminum plate aluminum manufacturers in tip appearance brought too much oil, but also added the remaining oil, except rolling oil film in the middle to produce products to carry out the query and segmentation, will be found out that the human eye so grease in appearance.
铝板去除油脂后,必须去除氧化物。为了除去氧化物,有必要从铝板的表面物理性地剥离材料。必须确认刷子干净,好使用有柔软毛的刷子比重的刷子。这是因为,不是去除,而是有擦拭氧化物的可能性。另一个选择是化学清除。
After grease removal, the oxide must be removed from the aluminum plate. In order to remove oxides, it is necessary to physically strip the material from the surface of the aluminum plate. Make sure the brush is clean, preferably one with soft bristles. This is because, instead of removing, there is the possibility of wiping the oxide. Another option is chemical removal.
该方法的理想选择是强碱溶液。可以将工件完全浸入解决溶液中,也可以使用喷雾瓶除去氧化物。这些溶液通常以磷酸为基础,或者可能含有氢氟酸,所以使用这些溶液时请充分注意。无论使用哪个选项,在清洗金属之后,必须等待足够的时间才能完全干燥。
The ideal choice for this method is a strong base solution. The workpiece can be fully immersed in the solution or the oxide can be removed using a spray bottle. These solutions are usually phosphoric acid based or may contain hydrofluoric acid, so be careful when using these solutions. No matter which option you use, after cleaning the metal, you must wait enough time to dry it completely.
,必须确认焊接的金属中没有油脂。这因为铝板中的杂质影响焊接,可能导致缺陷。金属表面用肉眼看起来很漂亮,但是很容易擦掉不能去除的油、油脂和其他液体。很多人用布或刷子擦金属,但不能有效地去除油脂。只是在周围走,情况就会恶化。
First, make sure there is no grease in the welded metal. This is because impurities in the aluminum plate interfere with welding and can lead to defects. Metal surfaces look nice to the naked eye, but are easy to rub off oils, grease, and other liquids that cannot be removed. Many people rub metal with a cloth or brush, but this does not remove grease effectively. Just walking around, things get worse.
难道说没有办法在出产时就避免这种问题吗?自然并不是,实际上铝板生产厂家可以在出产铝板前就对出产机器设备开展综合严格查询。假如在机械设备中本身就会有很多油脂,就应当立即清理并寻找缘故妥善处理。更多内容来//www.renttoplux.com咨询。
Is there no way to avoid this problem at the point of production? Nature is not, in fact, aluminum plate manufacturers can produce aluminum plate before the production of machinery and equipment to carry out a comprehensive strict inquiry. If there will be a lot of grease in the mechanical equipment itself, it should be cleaned up immediately and find a reason for proper handling. More content to //www.renttoplux.com.