当前位置: 首页- 新闻资讯

彩涂铝卷生产常见问题以及要避免

来源://www.renttoplux.com/发布时间:2022-07-14

很多时候就会一不小心就有可能造成彩涂铝卷的划算以及产品表面的变形,所以我们在使用彩涂铝卷使用时需要避免这些问题?如果您还不知道,那么您应该好好的看看了。
Many times, carelessness may cause the cost-effectiveness of color coated aluminum roll and the deformation of product surface, so we need to avoid these problems when using color coated aluminum roll? If you don't know, you should have a good look.
1、倘若要资金投入应用,要在一切正常的温度下,温度不可以超温也不可以太冰凉,倘若做为平屋面,高宽比不可小于10度。
1. If funds are to be invested in application, the temperature should not be over temperature or too cold under all normal temperatures. If it is a flat roof, the height width ratio should not be less than 10 degrees.
2、在设备以前,立即的开展查询,确保平屋面的原材料没有磨损的现象,确保能够一切正常的应用,在一切正常的状况下确保应用的使用寿命。
2. Before the equipment, immediately carry out the inquiry to ensure that the raw materials of the flat roof are free of wear and tear, and ensure that they can be used normally, and ensure the service life of the application under all normal conditions.

铝卷生产厂家
3、固定不动五颜六色铝卷的地脚螺栓头要用防潮性强的化学物质密封性,防止降水进到锈蚀。
3. The anchor bolt heads of fixed colorful aluminum coils should be sealed with chemicals with strong moisture resistance to prevent precipitation from entering into corrosion.
4、五颜六色铝卷加工的自然环境温度应在7℃之上,要依据五颜六色铝卷薄厚调节加工辊系的空隙,并消除辊面及垫板上的脏东西;另外要查询五颜六色铝卷两面是否掉漆,如掉漆,应查清缘故且听取意见对策后才可以不断加工。
4. The natural ambient temperature of colorful aluminum coil processing should be above 7 ℃, and the gap of the processing roll system should be adjusted according to the thickness of colorful aluminum coil, and the dirt on the roll surface and backing plate should be eliminated; In addition, you should check whether the paint falls off on both sides of the colorful aluminum coil. If the paint falls off, you should find out the cause and listen to the opinions and Countermeasures before continuous processing.
彩涂铝卷安装使用注意避免问题
Avoid problems in installation and use of color coated aluminum roll
1、安装前要立即查验,确保平屋面原材料无磨坏状况,确保一切正常应用,确保一切正常使用期。
1. Check immediately before installation to ensure that the raw materials of the flat roof are free of wear and tear, that everything is normally used and that everything has a normal service life.
2、假如要交付使用,要在常温状态,温度不可以超温也不可以太凉,假如做为平屋面,温度不可小于10度
2. If it is to be delivered for use, it should be in the normal temperature state. The temperature should not be over temperature or too cold. If it is a flat roof, the temperature should not be less than 10 degrees
3、彩涂铝卷加工的自然环境温度应在7℃之上。加工辊系的空隙应依据彩涂铝卷的薄厚开展调节,并消除辊面及支撑柱上的脏东西。另外,要查验彩涂铝卷两边漆料是不是掉下来。假如漆料掉下来,应查清缘故并采取建议的有效措施,随后再再次加工。
3. The natural ambient temperature of color coated aluminum coil processing should be above 7 ℃. The gap of the processing roll system should be adjusted according to the thickness of the color coated aluminum roll, and the dirt on the roll surface and support column should be eliminated. In addition, check whether the paint on both sides of the color coated aluminum roll falls off. If the paint falls off, the reason should be found out and effective measures should be taken, and then it should be processed again.
4、铝的密封性头应选用防水涂料,防止地脚螺栓浸蚀。
4. Waterproof coating shall be selected for the sealing head of aluminum to prevent the corrosion of anchor bolts.
5、铝卷生产厂家为确保彩涂铝卷的施工质量,务必严苛依照所述标准开展安装。
5. In order to ensure the construction quality of color coated aluminum coils, aluminum coil manufacturers must strictly carry out installation in accordance with the said standards.
以上就是今天为大家介绍的关于问题以及注意事项的全部内容,希望对大家能有所帮助,想要了解更多内容可以电话联系我们或者关注我们的网站//www.renttoplux.com,我们的工作人员会及时与您取得联系。
The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website //www.renttoplux.com , our staff will contact you in time.

Baidu
map