涂层铝卷指的是在铝卷表面进行颜色喷涂后得到的产品，涂层工艺是生产中十分重要的步骤，会直接影响到涂层的质量和产品的耐用性。因此，涂层铝卷的加工工艺是十分严格的。那么厂家在生产涂层铝卷的时候都包括哪些步骤？铝卷生产厂家为您介绍：
Coated aluminum coil refers to the product obtained after color spraying on the surface of aluminum coil. The coating process is a very important step in production, which will directly affect the quality of the coating and the durability of the product. Therefore, the processing technology of coated aluminum coil is very strict. So what steps do manufacturers include when producing coated aluminum coils? The aluminum coil manufacturer introduces to you:
1、原料卷输入：是开卷机连续开卷保证带卷连续稳定输入生产线，有的采取十字转动梁式载卷机，也有采取双台前后设置交替开卷机，目的都是为了及时供卷；
1. Raw material coil input: it is the continuous uncoiling of the uncoiler to ensure the continuous and stable input of the coil into the production line. Some adopt the cross rotating beam type coil carrier, and some adopt two sets of alternating uncoilers set in front and back, both for the purpose of timely coil supply;
2、表面清洗和化学处理：是为了将铝卷上下表面都清洗干净，并进行化学预处理，以保证油漆可以牢固的附着在铝卷表面；
2. Surface cleaning and chemical treatment: it is to clean the upper and lower surfaces of the aluminum coil, and carry out chemical pretreatment to ensure that the paint can firmly adhere to the surface of the aluminum coil;

3、涂漆：铝卷生产厂家在生产过程中，一条生产线上至少有两个以上的辊涂机，以保证面漆和底漆的两层涂色；
3. Painting: During the production process, the aluminum coil manufacturer has at least two roller coating machines on one production line to ensure the two layers of color of the top coat and the primer;
4、漆层固化：指的是刚进行涂漆的带卷要在接触下一个辊面之前完成固化，避免互相粘连和破坏，一般来讲，至少包含两个固化箱；
4. Paint curing: refers to the curing of the newly painted coil before contacting the next roll surface to avoid mutual adhesion and damage. Generally speaking, at least two curing boxes are included;
5、成品输出：保证生产线速度与成品卷转移同步。
5. Finished product output: ensure that the production line speed is synchronized with the transfer of finished products.
以上是铝卷生产厂家//www.renttoplux.com为您总结的涂层铝卷的生产工艺步骤，希望可以对您有所帮助。无论是对于什么产品而言，正确合理的加工工艺都是保证产品质量的基础，这一点大家一定要注意。
The above is the aluminum coil manufacturer //www.renttoplux.com The production process steps of coated aluminum coil summarized for you are expected to help you. For any product, correct and reasonable processing technology is the basis for ensuring product quality, which we must pay attention to.