The titanium plating process for aluminum profiles belongs to the coating process, which adds pre plating and electroplating process steps on top of the traditional titanium plating process. The aluminum profile process involves chemically treating the activated electroplating parts in saline and hydrochloric acid aqueous solutions. So, how to use industrial aluminum profiles correctly?

1，清洗时应使用含有润滑剂或中性洗涤剂的温水，不允许使用酸性或碱性洗涤剂。

1. Warm water containing lubricants or neutral detergents should be used during cleaning, and acidic or alkaline detergents are not allowed.

2，对于清洗后的铝合金型材，较好用优质的工业型材面漆保护蜡对阳极氧化膜进行抛光，或均匀喷涂一层丙烯酸树脂清漆。

2. For cleaned aluminum alloy profiles, it is better to polish the anodic oxide film with high-quality industrial profile paint protective wax, or evenly spray a layer of acrylic resin varnish.

三，运输铝合金型材时，严禁松开散装车，以免造成损坏。

3、 When transporting aluminum alloy profiles, it is strictly prohibited to loosen the bulk truck to avoid damage.

四，清洁工具较好用软布和毛巾，严禁用刚玉粉，砂纸，钢丝刷等摩擦材料对铝门窗表面进行清理。

4、 It is better to use soft cloth and towel as cleaning tools. It is strictly prohibited to use friction materials such as corundum powder, sandpaper, and steel wire brushes to clean the surface of aluminum doors and windows.

5个，铝合金门窗应根据使用环境定期清洗。

5 aluminum alloy doors and windows should be cleaned regularly according to the usage environment.

6，铝型材表面腐蚀，污染时，应及时清理，可以先用软布和酒精擦工业型材拭积垢，然后用水清洗。

6. When the surface of aluminum profiles is corroded or contaminated, it should be cleaned in a timely manner. You can first use a soft cloth and alcohol to wipe away the scale on the industrial profile, and then clean it with water.

一，熔铸是工业铝材生产的首道工序，主要过程为：。

1、 Melting casting is the first process in industrial aluminum production, and the main process is as follows:.

1，配料：根据需要生产的具体合号，计算出各种合金成分的添加量，合理搭配各种原材料，2，熔炼：将配好的原材料按工艺要求加入熔炼炉内熔化，并通过除气，除渣精炼手段将熔体内的杂渣，气体有效除去。

1. Ingredients: Calculate the addition amount of various alloy components based on the specific alloy grade required for production, and reasonably mix various raw materials. 2. Melting: Add the prepared raw materials to the melting furnace according to the process requirements for melting, and effectively remove impurities and gases from the melt through degassing and slag removal refining methods.

3，铸造：熔炼好的铝液在一定的铸造工艺条件下，通过深井铸造系统，冷却铸造成各种规格的圆铸棒。

3. Casting: The melted aluminum liquid is cooled and cast into various specifications of round cast rods through a deep well casting system under certain casting process conditions.

二，挤压是型材成形的手段，先根据型材产品断面设计，制造出模具，利用挤压机将加热好的圆铸棒从模具中挤出成形。

2、 Extrusion is a method of forming profiles. First, a mold is designed based on the cross-section of the profile product, and the heated round cast rod is extruded from the mold using an extruder.

三，工业铝型材表面上色，氧化，挤压好的铝合金型材，其表面耐蚀性不强，须通过阳极氧化进行表面处理以增加铝材的抗蚀性，耐磨性及外表的美观度，工业型材。

3、 The surface of industrial aluminum profiles is colored, oxidized, and extruded. The surface corrosion resistance of aluminum profiles is not strong, and surface treatment must be carried out through anodizing to increase the corrosion resistance, wear resistance, and aesthetic appearance of aluminum profiles.

本文由 铝卷生产厂家友情奉献.更多有关的知识请点击: //www.renttoplux.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from aluminum coil manufacturers. For more information, please click on: //www.renttoplux.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned