铝卷的包装应根据产品的规格、尺寸选择包装箱和包装方式，对于箱式包装，产品人箱后不能被挤伤或窜动。包装箱的制作材料可以是木板、多层板、纤维板、金属等材料。包装箱应清洁整齐，有足够的强度保证在贮运过程中不变形、不破损。木制包装箱中钉子呈迈步排列，钉尖不能外露，应盘倒，避免在贮运过程中钉帽、钉尖扎伤铝箔，底托的高度应满足叉车运输的要求。铝卷产品检验合格并盖上检印后，外面应缠一层结实的中性或弱酸性材料，接头处用胶带或标签封口。在端面垫上软衬垫.以保护铝卷的端面。加干燥剂，套上塑料袋，将塑料袋两端超出铝卷的部分塞人管芯，用尺寸合适的塑料堵头封口后放人包装箱。产品装箱后，上面再盖上一层防潮纸或塑料布，放人装箱单后，方可加盖并用钢带封箱，钢带应捆扎牢固。
The packaging of aluminum coils should be based on the specifications and dimensions of the product, and the packaging box and packaging method should be selected. For box packaging, the product should not be squeezed or moved behind the box. The materials used for making packaging boxes can be wooden boards, multi-layer boards, fiberboards, metal, and other materials. The packaging box should be clean and tidy, with sufficient strength to ensure no deformation or damage during storage and transportation. The nails in the wooden packaging box are arranged in steps, and the nail tips should not be exposed. They should be turned upside down to avoid damaging the aluminum foil during storage and transportation. The height of the bottom support should meet the requirements of forklift transportation. After the aluminum coil product passes the inspection and is stamped with the inspection seal, a layer of strong neutral or weakly acidic material should be wrapped around the outside, and the joints should be sealed with tape or labels. Place a soft pad on the end face to protect the end face of the aluminum coil. Add desiccant, cover the plastic bag, and stuff the part of the plastic bag that exceeds the aluminum roll at both ends into the tube core. Seal it with a suitable sized plastic plug and place it in the packaging box. After the product is boxed, a layer of moisture-proof paper or plastic cloth should be covered on top, and placed on the packing list before it can be stamped and sealed with steel straps. The steel straps should be securely tied.
铝卷的常规包装：对于厚度大于0.05mm以上且为硬状态的铝卷，一般可采用井字架包装，其包装应符合贮运的要求。井字架为木制，上下各为两根木方组成，下木方的高度应满足又车工作的要求，上木方上面制成与卷径向对应的圆弧形状，上下木方用螺杆固定，螺杆长度应低于上木方的圆弧面以避免扎伤铝卷。产品检验合格并盖上检印.，铝箔卷外面应缠一层结实的中性或弱酸性材料(一般采用高发布)，并放人装箱单，搭接处用胶带粘牢。在端面垫上软衬垫.以保护铝箱卷的端面。
Conventional packaging of aluminum coils: For aluminum coils with a thickness greater than 0.05mm and in a hard state, they can generally be packaged using a well shaped frame, and their packaging should meet the requirements for storage and transportation. The well shaped frame is made of wood, consisting of two wooden blocks at the top and bottom. The height of the lower wooden block should meet the requirements of the lathe work. The upper wooden block is made into an arc shape corresponding to the radial direction of the coil, and the upper and lower wooden blocks are fixed with screws. The length of the screw should be lower than the arc surface of the upper wooden block to avoid damaging the aluminum coil. The product inspection is qualified and stamped with an inspection seal. Firstly, a layer of strong neutral or weakly acidic material (usually high release) should be wrapped around the outer surface of the aluminum foil roll, and placed on the packing list. The overlap should be firmly adhered with tape. Place a soft pad on the end face to protect the end face of the aluminum box coil.
其次，加干燥剂，用整张塑料布包裹整个料卷，搭接处外层塑料布口向下并用胶带粘牢，将塑料布两端多余部分塞人管芯。
Secondly, add desiccant and wrap the entire material roll with a whole sheet of plastic cloth. The outer layer of plastic cloth at the overlap should be facing downwards and firmly adhered with tape. The excess parts at both ends of the plastic cloth should be stuffed into the pipe core.
用尺寸吻合的防雨硬纸板分别沿圆周方向包裹整个铝卷和封闭两端面，端面与圆周相接处及所有缝隙均用胶带粘牢。将包好的铝箔卷放到井字架上并沿圆周方向用钢带固定，钢带应捆扎牢固。在包装好的铝箔卷端面上各贴一张箱牌。除考虑箱子和井字架的承重、包装成本外，还应考虑运输方式及用户的运输装卸能力，通常我公司每个铝卷的包装重量为2.6吨
Wrap the entire aluminum coil and seal both ends along the circumference with rainproof cardboard that matches the size, and use adhesive tape to fix the joints and all gaps between the end face and the circumference. Place the wrapped aluminum foil roll on the well frame and secure it with steel straps along the circumference, which should be securely tied. Stick a box label on each end of the packaged aluminum foil roll. In addition to considering the load-bearing and packaging costs of boxes and grills, we should also consider the transportation method and the user's transportation and loading and unloading capacity. Usually, our company's packaging weight for each aluminum coil is 2.6 tons
铝卷出口包装方式：铝卷是出口量较大的产品，出口包装通常是采取了熏蒸井字架方式，外部用钢带固定，铝卷外部有双层防潮雨布，内部防止防潮剂，采取密封式包装，适合于海运。
Aluminum coil export packaging method: Aluminum coil is a product with a large export volume. Export packaging usually adopts the fumigation well shaped frame method, with the outer part fixed with steel strips. The aluminum coil has a double layer of moisture-proof rain cloth on the outer part and moisture-proof agent on the inner part. Sealed packaging is adopted, suitable for sea transportation.
This article is a friendly contribution from aluminum coil manufacturers. For more information, please click on: //www.renttoplux.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
