Is the cutting surface of laser cutting aluminum plate as smooth as cutting other materials? The cut of the aluminum plate is also smooth, and the aluminum plate is only a highly reflective material that requires a large laser generator. The cutting gas, like other materials, is cut using nitrogen gas, which will not cause a smooth surface.

铝板采用激光切割特点：

Aluminum plate adopts laser cutting features:

1、切割缝细：激光切割铝板的割缝一般在0.1mm-0.2mm

1. Cutting seam thickness: The cutting seam of laser cutting aluminum plate is generally 0.1mm-0.2mm

2、切割面光滑：激光切割铝板的切割面无毛刺无挂渣。

2. Smooth cutting surface: The cutting surface of laser cut aluminum plate is free of burrs and slag.

3、热变形小：激光加工的激光割缝细、速度快、能量集中，因此传到被切割材料上的热量小，引起材料的变形也非常小。

3. Low thermal deformation: Laser cutting is characterized by fine slits, fast cutting speed, and concentrated energy, resulting in minimal heat transfer to the material being cut and minimal deformation of the material.

4、节省材料：激光加工采用电脑编程，激光设备可以把不同形状的铝板加工件进行材料的套裁，提高铝板的材料利用率，节省大量的材料成本。

4. Material saving: Laser processing uses computer programming, and laser equipment can perform material cutting on aluminum plate processing parts of different shapes, improving the material utilization rate of aluminum plates and saving a lot of material costs.

5、能切多厚铝板主要看激光发生器的功率，一般6000W的厚能切到16mm，4500W能切到12mm。

5. The thickness of aluminum plates that can be cut mainly depends on the power of the laser generator. Generally, 6000W can be cut to 16mm at the thickest, and 4500W can be cut to 12mm.

铝板属于高反材料，对激光器的损伤很大!一般不会建议客户去拿光纤激光切割机去切割铝板，尽量少用!

Aluminum plate is a highly reflective material that causes significant damage to the laser! Generally, it is not recommended for customers to use a fiber laser cutting machine to cut aluminum plates, and use it as little as possible!