Usually, scratches on aluminum strips occur during the slitting process, and there are fewer issues with the masterbatch. Therefore, slitting employees should inspect and clean foreign objects on the production line before processing, pay attention to the surface of the aluminum strip during production, and observe whether there are scratches on the surface of the aluminum strip during packaging. At the same time, if there are scratches on the masterbatch in the province, production should be stopped in a timely manner and reported in a timely manner. The aluminum strip used for transformers is cut without burrs, and the surface of the finished product is smooth and scratch free. The plate shape is flat, and the cross-section is neat. After chamfering, rounded corners and zero burrs are achieved. The processed aluminum strip should not produce any new surface defects (such as scratches, transverse vibration lines left by the straightening machine, etc.) Note: Replace and clean the surface of each unit in a timely manner after anti scratch treatment.

变压器用铝带主要与用来做干式变压器内部缠绕，外观质量要做到断面整齐，圆角，没有毛刺，松卷，起杠，塔型等缺陷。表面没有辊印，黑线，亮斑，划伤，磕碰等缺陷。 表面没有退火后形成的油斑，撕裂，起泡等现象。 描述：表面光滑，无划痕。边部可做倒角，光滑，优于国家标准。电阻率小于等于0.028。 包装：木托盘，内有防潮纸，中间纸套筒，内径300mm或者500mm. 免费提供样品，量大价格从优含铝量：≥99.6% 执行标准：GB/T 3190-1996 延伸率：≥35% 抗拉强度：60-95Mpa 交货期：7-15天用途：主要用于大型变压器，太阳能，电力等行业。公司常年备有大量变压器铝带现货库存，如果你需要变压器铝带可以联系我们，我们将以优质的产品，贴心的服务为你提供完善的服务。

The aluminum strip used for transformers is mainly used for internal winding of dry-type transformers. The appearance quality should ensure that the section is neat, rounded, and free of defects such as burrs, loose coils, lifting bars, and tower shapes. There are no defects such as roller marks, black lines, bright spots, scratches, bumps, etc. on the surface. There are no oil stains, tears, bubbles or other phenomena formed on the surface after annealing. Description: The surface is smooth and free from scratches. The edges can be chamfered, smooth, and superior to national standards. The resistivity is less than or equal to 0.028. Packaging: Wooden pallet with moisture-proof paper inside, middle paper sleeve, inner diameter of 300mm or 500mm Free samples are provided, with large quantities and favorable prices. Aluminum content: ≥ 99.6%. Executive standard: GB/T 3190-1996 Elongation: ≥ 35% Tensile strength: 60-95Mpa. Delivery time: 7-15 days. Usage: mainly used in large transformers, solar energy, power and other industries. The company has a large inventory of transformer aluminum strips in stock all year round. If you need transformer aluminum strips, you can contact us. We will provide you with high-quality products and thoughtful services to provide you with comprehensive services.

铝带外表损伤主要原因 ：铸锭内存在一定数量的坚硬的金属颗粒，①铸锭外表附着有杂物或铸锭成分偏析。铸锭表面存在大量偏析浮出物而铸锭又未进行均匀化处置或均匀化处置效果不好时。挤压过程中金属流经工作带时，这些偏析浮出物或坚硬的金属颗粒附着在工作带外表或对工作带造成损伤，终对铝带外表造成划伤； ②工作带上有杂物，使工作带表面在挤压时受伤而划伤铝带； 当其与铝带接触时对铝带外表造成划伤；③出料轨道或摆床上有裸露的金属或石墨条内有较硬的夹杂物。 由于速度过快造成铝带碰伤；④在叉料杆将铝带从出料轨道上送到摆床上时。 ⑤在摆床上人为拖动铝带造成擦伤； ⑥在运输过程中铝带之间相互摩擦或挤压造成损伤。

The main cause of surface damage to aluminum strips is the presence of a certain amount of hard metal particles inside the ingot, ① debris or segregation of ingot components attached to the surface of the ingot. When there is a large amount of segregation floating on the surface of the ingot and the ingot has not been homogenized or the homogenization treatment effect is not good. During the extrusion process, when the metal flows through the working strip, these segregation floats or hard metal particles adhere to the surface of the working strip or cause damage to the working strip, ultimately causing scratches on the surface of the aluminum strip; ② There are debris on the work belt, causing the surface of the work belt to be injured during compression and scratching the aluminum strip; When it comes into contact with the aluminum strip, it causes scratches on the surface of the aluminum strip; ③ There are exposed metal or graphite strips with hard inclusions on the discharge track or bed. The aluminum strip is damaged due to excessive speed; ④ When the aluminum strip is transported from the discharge track to the swing bed by the fork rod. ⑤ Scratches caused by manually dragging the aluminum strip on the bed; ⑥ Damage caused by mutual friction or compression between aluminum strips during transportation.

解决方法 ：加强对铸锭质量的控制； 尽量减少铝带与辅具的接触损伤。③用软质毛毡将铝带与辅具隔离。 尽量防止随意拖动或翻动铝带，及时清理毛毡上面的异物。④生产中要轻拿轻放。 尽量防止相互摩擦。⑤在料框中合理摆放铝带。

Solution: Strengthen the control of ingot quality; Minimize contact damage between aluminum strips and accessories as much as possible. ③ Use soft felt to isolate the aluminum strip from the accessory. Try to prevent arbitrary dragging or flipping of the aluminum strip, and clean foreign objects on the felt in a timely manner. ④ Handle with care during production. Try to prevent mutual friction. ⑤ Reasonably place aluminum strips in the material frame.